The presence of metal can compromise dental CBCT imaging because highly attenuating materials prevent X-rays from passing uniformly through the scanned region. When a patient has dental implants, metallic restorations, or other dense materials, the reconstructed image may show artifacts, meaning image features that do not accurately represent the patient’s true anatomy.
This occurs because of the physical properties of these materials. Structures with high density and a high atomic number strongly attenuate the X-ray beam. As the beam passes through these dense materials, lower-energy photons are preferentially absorbed, producing a phenomenon known as beam hardening.
As a result, fewer photons may reach the detector in areas affected by the metal. This loss or distortion of projection data can interfere with the reconstruction process, generating streaks, dark bands, shadows, and other artifacts that may extend beyond the metallic structure itself and obscure adjacent anatomy.
Metal artifacts are image features that do not accurately represent the patient’s actual anatomy.
Dental implants and metallic restorations are common sources of artifacts in dental CBCT imaging.
High-density, high-atomic-number materials strongly attenuate the X-ray beam.
Beam hardening occurs when lower-energy photons are preferentially absorbed as the beam passes through dense materials.
Reduced or inconsistent photon data reaching the detector can lead to reconstruction errors and visible artifacts.
Highly attenuating materials other than metal can also contribute to similar artifacts.
Artifacts are image features or distortions that do not correspond accurately to the patient’s actual anatomical structures and may interfere with diagnostic interpretation.
Dental implants, metallic restorations, prosthetic components, and other highly attenuating dental materials are common sources of artifacts.
Because metals generally have high density and high atomic numbers, causing stronger attenuation of the X-ray beam and reducing the number of photons that reach the detector.
Beam hardening occurs when lower-energy photons are preferentially absorbed as an X-ray beam passes through dense material, leaving the transmitted beam with a higher average energy. This change in the beam spectrum can contribute to reconstruction artifacts.
When too few photons reach the detector or the projection data become highly inconsistent, the reconstruction algorithm has less reliable information available. This can result in streaks, dark bands, shadows, and other distortions.
Yes. Any material with sufficiently high attenuation can contribute to artifacts, although metallic dental materials are among the most common causes in CBCT examinations.
Crie sua conta gratuita para ver o conteúdo completo, salvar na biblioteca e receber recomendações para a sua clínica.