The IOS (Intraoral Scanner) uses optical technology to record tooth and tissue surfaces and transform them into a three-dimensional digital representation.
In practice, the equipment performs successive acquisitions while traveling through the oral cavity. This information is processed by the software and combined to progressively form the digital model.
But the process is more complex than simply “photographing teeth”.
At the tip of the scanner there are optical systems capable of projecting and capturing light onto intraoral structures. From this information, the system calculates geometric characteristics of the surface and builds a three-dimensional representation.
Therefore, the final result is not a conventional photograph.
The scanner transforms optical information into spatial data that can be digitally reconstructed.
Different technologies may use different optical principles, but they all need to solve the same problem: three-dimensionally reproduce what is being captured in the mouth (RICHERT et al., 2017).
During scanning, new images need to be related to the information that has already been captured.
This tracking process, or tracking, allows the system to recognize previously recorded characteristics and determine the position of new acquisitions in relation to the existing model.
This is why scanner movement strategy matters.
The operator is not simply passing a camera over the teeth. It is conducting a continuous process of data acquisition and recording.
As the scan progresses, small acquisitions are combined to form a three-dimensional mesh.
The software then allows you to view this reconstruction in practically real time.
In the Eagle IOS (Intraoral Scanner), this process transforms the capture of intraoral surfaces into a digital model that can be used in different clinical and laboratory applications.
And here there is an important point: the quality of the model does not depend exclusively on the scanner.
The extent of the scanned area, anatomy, surface characteristics and the technique used by the operator can influence the result (ABDUO; ELSEYOUFI, 2018).
Because not every surface offers the same amount of information to the optical system.
Saliva, blood, highly reflective surfaces, areas with little geometric definition and mobile tissues can make acquisition and recording difficult.
Furthermore, the larger the scanned area, the greater the accumulation of small errors throughout the reconstruction.
Therefore, precision is not an absolute characteristic of the equipment.
It needs to be analyzed considering the clinical context and the acquisition protocol.
These two concepts constantly appear in studies on intraoral scanners.
Trueness represents how close the obtained model is to a reference considered true.
Precision represents the ability to obtain similar results when the same acquisition is repeated.
A scanner can have good repeatability and still show some deviation from the reference.
This distinction is important because it avoids treating “accuracy” as a single number capable of summarizing the entire performance of a piece of equipment.
An interesting example comes from an in vitro study published in 2026 that compared five intraoral scanners in scanning endocrown preparations, including the Eagle IOS.
The researchers analyzed the trueness of the models in different regions of the preparation and found differences between the evaluated systems.
The result brings a more important reflection than simply saying which equipment “won”:
The performance of a scanner needs to be interpreted according to the surface, the extent of the scanning and the clinical application for which it will be used.
In other words, evaluating a scanner means looking at the technology + the protocol + the clinical case, and not just at an isolated specification (MOTA et al., 2026).
An intraoral scanner needs to:
CAPTURE → optical information from the surface
TRACK → relate new acquisitions to previous ones
RECONSTRUCT → form the three-dimensional model
EXPORT → make data available for other stages of processing
The Eagle IOS participates precisely in this transformation: from the anatomy present in the mouth to a digital representation that can be used in planning and at different stages of the clinical flow.
And perhaps the best way to understand the technology is this:
An intraoral scanner does not simply “take a picture of your teeth”. It collects optical data and uses it to digitally reconstruct captured anatomy.
The quality of this result depends both on the technology and on how, where and for what it is used.
ABDUO, Jaafar; ELSEYOUFI, Mohamed. Accuracy of intraoral scanners: a systematic review of influencing factors. European Journal of Prosthodontics and Restorative Dentistry, v. 26, no. 3, p. 101-121, 2018.
MOTA, Iago Fonseca Silva et al. Intraoral scanning of endocrown preparation on natural teeth in an in-vitro setting: a segmented trueness analysis. International Journal of Computerized Dentistry, 2026. DOI: 10.3290/j.ijcd.b7003274.
RICHERT, Raphaël et al. Intraoral scanner technologies: a review to make a successful impression. Journal of Healthcare Engineering, 2017. DOI: 10.1155/2017/8427595.
Explore outros conteúdos, aprofunde seus conhecimentos e descubra novas possibilidades para sua carreira.