CAD/CAM is an acronym for Computer-Aided Design and Computer-Aided Manufacturing, or computer-aided design and computer-aided manufacturing.
In dentistry, the concept represents the use of computational resources to design and manufacture restorations and dental devices. Although the term seems mainly associated with equipment, CAD/CAM is, in reality, a different way of organizing certain stages of clinical and laboratory work.
Digitization begins by obtaining patient information. Intraoral scanning, for example, allows you to virtually record tooth surfaces and produce a digital model that can be used in planning. Based on this information, the professional or laboratory can design the restoration considering anatomy, proximal contacts, occlusal relationship and specific characteristics of the case.
It is important to realize that the computer does not alone determine what a restoration should look like. It offers tools for professionals to visualize, modify and evaluate different possibilities.
The CAD corresponds to the drawing stage.
Instead of building the anatomy of the restoration exclusively on a physical model, the project can be developed in a virtual environment.
This allows you to work with different parameters and preview changes before manufacturing.
A crown, for example, can be designed considering the anatomy of the adjacent teeth, the proximal contacts, the available space and the relationship with the antagonist.
This environment also makes it possible to store and modify digital projects, which can facilitate communication between clinic and laboratory and the reproduction of certain steps.
But there is an essential question:
Software can offer countless design possibilities. He alone does not know which one is biologically and clinically suitable for that patient.
This decision remains professional.
The CAM corresponds to computer-aided manufacturing.
Once the design is defined, digital information can be used to guide the production of the restoration.
In dentistry, this can happen mainly through milling or additive manufacturing, depending on the indication and the material used.
This stage brought an important change to the relationship between laboratory and clinic: in certain treatments, the digital project can be transferred directly to manufacturing, reducing some intermediate steps.
But manufacturing is also not simply a matter of pushing a button.
The chosen material, its properties, the manufacturing strategy and subsequent finishing steps can affect the final result.
Glass ceramics, zirconia, resins and hybrid materials, for example, have different characteristics and should not be treated as equivalent just because they can be used in CAD/CAM flows (REXHEPI et al., 2023). Does
No.
This is one of the ideas worth deconstructing.
Digital flows can reduce time in certain steps, but the gain depends on the procedure, equipment, material, operator experience and flow organization.
A systematic review that compared digital and conventional flows found time differences that varied depending on the stage and type of procedure analyzed (BESSADET; DRANCOURT; EL OSTA, 2025).
In other words: digital is not synonymous with instantaneous.
The gain may be in the reduction of certain steps, in the ease of communication, in the possibility of modifying the project or in the integration between different phases of the treatment. Does
Not necessarily either.
This is perhaps the most important distinction.
The technology used to manufacture a restoration does not alone determine its clinical performance.
Preparation, data acquisition, planning, material selection, manufacturing, finishing, cementing and clinical control continue to be part of the result.
A systematic review of single-piece ceramic restorations manufactured by CAD/CAM found favorable clinical results, but did not demonstrate universal superiority over conventional restorations (CARVALHO et al., 2018).
Therefore, the most appropriate reasoning is not:
“CAD/CAM is better.”
But:
“In which situations does CAD/CAM offer relevant advantages in this case?”
This is a clinical question.
Perhaps the main change is not in the restoration itself, but in the information that becomes available during the treatment.
A digital model can be stored.
A project can be reviewed.
A restoration can be reproduced from digital information.
Data can be shared between professionals.
And different technologies can participate in the same treatment.
This opens up possibilities that go beyond simple manufacturing.
At the same time, the greater the digitalization, the greater the importance of understanding the quality of the data, the limitations of the materials and the clinical criteria used to make decisions.
Technology expands possibilities. Clinical knowledge determines how to use them.
To save
CAD → allows you to design.
CAM → allows manufacturing.
But between the two there is something that no acronym can replace: clinical planning.
CAD/CAM does not automatically transform a treatment into a better treatment. It offers new tools so that professionals can plan, produce and control certain steps differently.
And perhaps that is precisely where its greatest value lies: not in replacing dental knowledge, but in expanding the possibilities of putting it into practice.
The evolution of intraoral scanners has also been accompanied by studies that evaluate their ability to reproduce different clinical characteristics. An in vitro study published in 2026 compared five scanning technologies in digitizing endocrown preparations, including Eagle IOS. The researchers analyzed the trueness in different regions of the preparation and observed differences in performance between the equipment, reinforcing that the evaluation of ascanner must consider the type of surface, the scanned region and the intended clinical application, and not just a general measure of accuracy. (MOTA et al., 2026)
MOTA, Iago Fonseca Silva et al. Intraoral scanning of endocrown preparation on natural teeth in an in-vitro setting: a segmented trueness analysis. International Journal of Computerized Dentistry, 2026. DOI: 10.3290/j.ijcd.b7003274
BESSADET, Marion; DRANCOURT, Noémie; EL OSTA, Nothing. Time efficiency and cost analysis between digital and conventional workflows for the manufacture of fixed dental prostheses: a systematic review. The Journal of Prosthetic Dentistry, v. 133, no. 1, p. 71-84, 2025.
CARVALHO, Inês Filipa Alves de et al. Clinical performance of CAD/CAM tooth-supported ceramic restorations: a systematic review. The International Journal of Periodontics & Restorative Dentistry, v. 38, no. 4, p. e68-e78, 2018.
REXHEPI, Imena et al. Clinical applications and mechanical properties of CAD-CAM materials in restorative and prosthetic dentistry: a systematic review. Journal of Functional Biomaterials, v. 14, no. 8, p. 431, 2023.
Explore outros conteúdos, aprofunde seus conhecimentos e descubra novas possibilidades para sua carreira.