In routine dentistry, maintenance usually comes into play when something stops working.
The chair has a fault.
The compressor loses performance.
A piece of equipment begins to behave irregularly.
The autoclave needs to be removed from operation.
A service needs to be rescheduled.
At that moment, maintenance stops being planning and becomes urgency.
Preventative maintenance proposes just the opposite: monitoring the equipment before a failure compromises its function. The ANVISA (National Health Surveillance Agency) manual for dental services describes preventive maintenance as a program based on predetermined criteria to reduce the probability of failures, also highlighting its role in the availability, reliability and safety of dental equipment (ANVISA, 2006).
When equipment fails, the cost rarely ends with repair.
There is a time when the equipment is unavailable.
There is a procedure that needs to be interrupted.
There is an agenda that needs to be reorganized.
There is a team that needs to adapt the flow.
And, depending on the situation, there is a patient who needs to return.
A classic article on dental equipment maintenance already highlighted that routine monitoring, maintenance and repair of essential systems help to avoid mechanical failures capable of significantly compromising clinical routine (YOUNG, 1991).
Therefore, the question should not be:
“How much does maintenance cost?”
But:
“How much does it cost to find out that I should have done maintenance after the equipment stopped?”
This is an interesting point.
Equipment rarely goes from 100% functional to completely stopped without showing any intermediate signal.
There may be changes in performance, noise, leaks, heating, oscillations, loss of pressure or changes in system behavior.
Not every sign means an imminent failure—but ignoring changes can eliminate the opportunity to investigate the problem while it is still small.
Preventive maintenance works precisely in this interval between normal operation and failure.
It's a change of logic: not waiting for the equipment to break down to discover that it needed attention.
Maintenance should not be thought of just as a strategy to increase the useful life of equipment.
It is also related to security.
In dental environments, electrical equipment, sterilization systems, radiology equipment, medical gases and other resources need to be maintained and inspected according to their characteristics and applicable recommendations. A review on the safety and maintenance of equipment in oral and maxillofacial surgery recommends following manufacturers' guidelines, maintaining inspection policies and documenting the activities carried out (KEELEY, 2017).
In other words: maintenance → reliability → safety.
They are not separate subjects.
Preventative maintenance does not necessarily mean waiting for a technician to visit.
There is a layer of daily operational care.
Proper cleaning.
Visual inspection.
Component check.
Reservoir care.
Drainage when indicated.
Observation of noises or changes.
Use according to the manufacturer's instructions.
Record of occurrences.
Each piece of equipment will have its own recommendations, and they must be followed in accordance with the manual and the applicable maintenance program.
This is particularly important in the water systems of dental units.
Water lines can encourage the formation of biofilm due to the characteristics of the pipes, low flow and water stagnation. Contamination can increase significantly within the lines compared to the incoming water (BARBEAU et al., 1996; PANKHURST; COULTER, 2007).
Therefore, taking care of the dental unit also means taking care of the systems that are not visible during the service.
“But it just installed.”
This phrase can give a false sense of security.
A study published in 2024 found microbiological contamination in some water lines of new dental chairs, showing that the “new” condition does not eliminate the need for adequate control and procedures before clinical use (MORIN et al., 2024).
This is important because maintenance should not be understood simply as:
“fixing old equipment”.
It starts with proper installation, configuration, cleaning, correct use, monitoring and maintenance according tospecification.
When we think about the dental chair, we usually think about the upholstery, the backrest and the movements.
But, behind it, there is a network of systems:
water → air → suction → instruments → controls → electrical components → safety systems.
A change in one of them can affect the clinical experience.
Water lines are a good example. Studies demonstrate that maintenance and disinfection protocols can significantly reduce the bacterial load, but they also show that contamination can increase again when measures are interrupted (TUTTLEBEE et al., 2002).
This reveals a fundamental characteristic of maintenance:
It is not a one-off action. It's a routine.
There is also an error at the other extreme.
Preventive maintenance does not mean constantly dismantling everything or replacing components simply because “it’s been a while”.
The program needs to consider:
manufacturer's recommendations;
frequency of use;
operating conditions;
failure history;
equipment characteristics;
regulatory requirements;
criticality of that equipment for service.
The literature on dental equipment management precisely reinforces the need for documented maintenance and inspection policies aligned with the manufacturer's recommendations (KEELEY, 2017).
Prevention also requires method.
Imagine two pieces of equipment that are exactly the same.
One of them never had his interventions recorded.
The other has a history of:
maintenance → adjustments → replacements → calibrations → occurrences.
Which one allows for smarter management?
The second.
Because history transforms maintenance into information.
It allows you to identify recurrences, monitor equipment behavior and plan interventions before certain problems become critical.
Therefore, recording maintenance should not be seen as bureaucracy.
It's a way to get to know the equipment over time.
When equipment works normally, no one thinks about the maintenance that allowed it to function normally.
And that is precisely the paradox.
The success of preventive maintenance is often the absence of a problem.
No service needed to be cancelled.
No equipment stopped unexpectedly.
No procedure needed to be interrupted due to an avoidable failure.
No patient needed to realize that something went wrong.
Preventive maintenance is an invisible investment because its best result is a problem that never happens.
In the office, this means more than preserving equipment.
It means preserving continuity, security, predictability and trust in the clinical environment.
YOUNG, J. M. Maintaining dental equipment. Prevent problems before they occur. Journal of the American Dental Association, vol. 122, no. 3, p. 83-88, 1991.
KEELEY, Katherine A. Equipment safety, maintenance and inspection: what the oral surgeon needs to know. Oral and Maxillofacial Surgery Clinics of North America, vol. 29, no. 2, p. 209-221, 2017. DOI: 10.1016/j.coms.2016.12.012.
PANKHURST, Caroline L.; COULTER, Wilson A. Do contaminated dental unit waterlines pose a risk of infection? Journal of Dentistry, v. 35, no. 9, p. 712-720, 2007. DOI: 10.1016/j.jdent.2007.06.002.
BARBEAU, J.; TANGUAY, R.; FAUCHER, E. et al. Microbial contamination of dental unit waterlines: current preventive measures and emerging options. Compendium of Continuing Education in Dentistry, vol. 17, no. 7, p. 691-698, 1996.
TUTTLEBEE, C. M. et al. Effective control of dental chair unit waterline biofilm and marked reduction of bacterial contamination of output water using two peroxide-based disinfectants. Journal of Hospital Infection, v. 52, no. 3, p. 192-205, 2002. DOI: 10.1053/jhin.2002.1282.
MORIN, C. et al. Initial waterline contamination by Pseudomonas aeruginosa in newly installed dental chairs. 2024.
BRAZIL. National Health Surveillance Agency (ANVISA). Dental services: risk prevention and control. Brasília, DF: ANVISA, 2006.
Explore outros conteúdos, aprofunde seus conhecimentos e descubra novas possibilidades para sua carreira.